|
Product Details:
|
| Technology: | Electrochemical | Measurement Range: | 0-25% Vol. O2 |
|---|---|---|---|
| Maximum Overload: | 30% Vol. O2 | Output Signal: | 0.195 - 0.25 MA In Air |
| Response Time (T90): | <15 Seconds | Offset (3 Minutes N2 ): | <0.5% Vol. O2 |
| Linearity: | Can Be Considered Linear In Many Cases | ||
| Highlight: | 7OX-V,O2 Sensor Replacement 100Ω Casing |
||
7OX-V Gas Oxygen Sensor 34g Load Resistor 100Ω Casing Materia ABS
The data provided in this document are valid at 20°C, 50% RH and 1013 mBar for 3 months from the date
of sensor manufacture. Output signal can drift below the lower limit over time. For guidance on the safe
use of the sensor and on sensor performance outside of these environmental limits, please refer to the
Operating Principles.
ENVIRONMENTAL
| Operating Temperature Range | -20°C to +50°C |
| Recommended Storage Temp | 0°C to 20°C |
| Temperature Coefficient | 0.2% signal / °C |
| Absolute Pressure Range | Atmospheric ± 10% |
| Differential Pressure Range | 40 mBar maximum |
| Pressure Coefficient | <0.02% signal / mBar |
| Relative Humidity Range | Intermittent:0 to 99%RH non-condensing |
| Continuous:15 to 99%RH non-condensing |
IMPORTANT NOTES
Do not remove label. Do not solder to pins. When installing the sensor into instrumentation,the sensor vent hole should not be blocked.
The instrument should also be adequately vented. If the sensor vent hole is blocked or if the instrument is not adequately vented, sensor performance will be compromised.
For further details, refer to Operating Principles OP02.
LIFETIME
| Long Term Output Drif | <5% signal / year |
| Expected Operating Life | 2 years in air |
| Storage Life | 6 months in original packaging |
Contact Person: Xu
Tel: 86+13352990255
