|
Product Details:
|
| Operation Principle: | 3-Electrode Electrochemical | Nominal Range: | 0 - 200 Ppm |
|---|---|---|---|
| Maximum Overload: | 400 Ppm | Inboard Filter: | To Remove Acidic Gases |
| Output Signal: | 700 ± 200 NA/ppm | Resolution (Electronics Dependent): | < 0.1 Ppm |
| T90 Response Time: | < 50 S | Typical Baseline Range (pure Air, 20°C): | -1.0 Ppm To 1.0 Ppm |
| Maximum Zero Shift (+20°C To +40°C): | See Graph | Repeatability: | < 2 % Of Signal |
| Highlight: | CF-200 Carbon Monoxide Gas Sensor,400 ppm Carbon Monoxide Gas Sensor |
||
CO/CF-200 Carbon Monoxide Gas Sensor CO Air Quality Monitoring
Applications
• Continuous Air Quality Monitoring
• Safety and Environmental Control
Specification Sheet
| Rec. Load Resistor | 10 - 33 Ω |
| Bias (V_Sens-V_Ref) | not recommended |
| Conformity to RoHS directive | RoHS Compliance |
| Relative Humidity Range | 15 % to 90 % RH non-condensing |
| Temperature Range | -40 °C to 50 °C |
| Pressure Range | Atmospheric |
| Pressure Coefficient | N.D |
| Humidity Effect | None |
| Expected Operation Life | 3 years in air |
| Expected Long Term Output Drift in air | < 2 % signal loss per month |
| Storage Life | 6 months in container |
| Rec. Storage Temperature | 5°C - 20°C |
| Warranty Period | 12 months from date of dispatch |
Cross Sensitivity Data
The table below does not claim to be complete. We recommend using the target gas
for calibration purposes. Using surrogate (interfering) gases can result in
inaccuracies in the final calibration. Please contact Membrapor AG for further support
regarding cross sensitivities.
Contact Person: Xu
Tel: 86+13352990255
