|
Product Details:
|
| Nominal Range: | 0-100ppm | Maximum Overload: | 500ppm |
|---|---|---|---|
| Inboard Filter: | To Remove H2S | Expected Operating Life: | Two Years In Air |
| Output Signal: | 0.37 ± 0.07 µA/ppm | Resolution: | 0.5ppm |
| Highlight: | 3STF Sulfur Dioxide Sensor,Sulfur Dioxide Sensor,SO2 Sensor |
||
Product Description:
3STF 3ST/F SO2 Sensor The Sulfur Dioxide Sensor Is Used As a Smoke Monitor
Features:
Temperature Dependence
The output of a CiTiceL can vary with
temperature. The graph here shows the variation
in output with temperature for 3ST/F CiTiceLs
based on a sample of about 16 sensors. The
results are shown in the graph as a mean for the
batch, and expressed as a percentage of the
signal at 20°C.
From a statistical viewpoint, for a sample of
this size, the range in values observed for all
sensors of this type will fall within a range three
times the standard deviation above or below the
mean. Assuming therefore this sample is typical,
then the temperature behaviour of all 3ST/F
CiTiceLs will fall in the band +3SD to -3SD.
Specifications:
| Gas | Conc. | 3ST/F |
| Carbon monoxide: | 300ppm | <5ppm |
| Hydrogen sulphide: | 15ppm | 0ppm |
| Nitric oxide: | 35ppm | 0ppm |
| Nitrogen dioxide: | 5ppm | »-5ppm |
| Chlorine: | 1ppm | <-0.5ppm |
Contact Person: Xu
Tel: 86+13352990255
