Product Details:
|
Nominal Range: | 0 ~ 500 Ppm | Maximum Overload: | 1,000 Ppm |
---|---|---|---|
Sensitivity (20℃): | 0.058 ± 0.033 μA/ppm | Response Time (T90): | ≤ 120 S |
Highlight: | 4ETO-500 Ethylene Oxide Gas Sensor,Ethylene Oxide Gas Sensor 4 Series |
4ETO-500 Ethylene Oxide 4 Series Electrochemical
Product Description
This sensor is designed for the measurement of Ethylene Oxide concentration in gas phase. It can be used as the pin-to-pin replacement of the standard 4-series electrochemical Ethylene Oxide sensors which made by the other manufacturers.
Installation
Output signals from the sensor pins are different. Inappropriate use of the pins in product design will affect the sensor functionality. Exposure to high concentrations of solvent vapors should be avoided under any condition. Mechanical overstress may cause deformation or cracks of the plastic enclosure of the sensor. If the sensor is used in extreme environmental conditions, please contact us for more details.
Datasheet:
Zero Signal (20℃) | -0.2 ~ 2.5 μA |
Baseline Shift | (-20℃ ~ 50℃) < 25 ppm |
Linearity | Linear up to 500 ppm |
Bias Voltage | +300 mV |
Resolution | 10 ppm |
Contact Person: Xu
Tel: 86+13352990255