YJJ MH-Z16 Infrared Carbon Dioxide Sensor (Infrared CO2 Mini Module) Is Used For Industrial Process Safety Protection

Product Description:

YJJ MH-Z16 Infrared Carbon Dioxide Sensor (Infrared CO2 Mini Module) Is Used For Industrial Process Safety Protection

Features:

MH-Z16 Infrared CO2 sensor infrared CO2 small module

Product introduction

Infrared CO2 sensor (infrared CO2 small module) mh-z16 product description

Mh-z16 NDIR infrared gas small module is a general type, small sensor, using the principle of non-dispersive infrared (NDIR) to detect the presence of CO2 in the air, has a good selectivity, no oxygen dependence, long life.Built-in temperature sensor for temperature compensation;With digital output and analog voltage output, easy to use.Mh-z16 is a general infrared gas sensor made by combining mature infrared absorption gas detection technology with precise optical path design and excellent circuit design.

Can be widely used in hvac refrigeration and indoor air quality monitoring, industrial process and safety protection monitoring, agricultural and animal husbandry production process monitoring.

The design, manufacture and verification of this product shall follow the following national standards: GB/ t13384-92

Characteristics of infrared CO2 sensor mh-z16 (infrared CO2 small module)

High sensitivity, high resolution

Low power consumption

Provide UART, analog voltage signal, PWM waveform and other output methods

Fast response time

Temperature compensation, excellent - output

Excellent stability

Long service life

Moisture resistance

No poisoning

Infrared CO2 sensor (infrared CO2 small module) mh-z16 is the main application

Can be widely used in hvac refrigeration and indoor air quality monitoring, industrial process and safety protection monitoring, agricultural and animal husbandry production process monitoring.

Mh-z16 for infrared CO2 sensor (infrared CO2 small module)

Technical parameters

The parameter value

Working voltage 4.5v ~ 6v DC

The average current 85 mA

Interface level 3.3 V

Measuring range

Optional within the range of 0~10%VOL (see table 2 for details)

The output signal 0.4v ~ 2v DC (alternative)

PWM, 1 hz UART

Warm up time 3 min

The response time T90 < 90 s

Working temperature 0 ℃ to 50 ℃

Working humidity 0 ~ 95% RH

Heavy volume 19.5 g

Life of life > 5 years

Specifications: