YJJ 0393 0152 0-300PPM Nitrogen Monoxide Sensor Used For Smoke Gas Monitoring Industrial Combustion Equipment

Product Description:

0393 0152 0 - 300PPM Nitrogen Monoxide Sensor Is Used for Smoke Gas Monitoring in Industrial Combustion Equipment

Features:

0393 0152 is a low-range nitrogen monoxide (NO low) spare sensor launched by Testo. It is specifically designed to be compatible with the Testo 340 and other series of gas analyzers. It is often used as a replacement component for precise monitoring of low-concentration nitrogen monoxide. The following is an introduction to its detailed parameters and usage:
Core Parameters
Parameter Type Specific Information
Detection Target Low concentration nitric oxide (NO), focused on precise detection in low-range scenarios, suitable for monitoring low content of nitric oxide in flue gas
Measurement Range and Accuracy Range is 0 - 300 ppm, resolution is 0.1 ppm; in terms of accuracy, within the 0 - 39.9 ppm range, the error is ±2 ppm, for the remaining ranges, the error is ±5% of the measured value, capable of accurately capturing the subtle changes in nitric oxide concentration in the low concentration range
Response Time Response time is less than 30 seconds, can quickly feedback the concentration of nitric oxide in the measured environment, meeting the needs for rapid on-site monitoring
Physical and Compatibility Characteristics Weight is only 18g, size is 40×30×30mm, small in size and easy to install and replace; pre-calibration has been completed before leaving the factory, calibration data is stored in the sensor, no additional on-site calibration is required when replacing, simply insert it into the corresponding flue gas analyzer for use
Compatible Equipment Core compatible with Testo 340 flue gas analyzer, and can also be matched with Testo 330 and other combustion gas analyzers that support this type of sensor Main purpose
Industrial combustion equipment smoke gas monitoring: Applicable for the smoke gas detection of boilers, kilns, and other combustion equipment in industries such as chemical engineering, power generation, and heating. Through the accompanying smoke gas analyzer, it can monitor the emission of low-concentration nitrogen monoxide in the smoke gas after combustion in real time, helping enterprises determine whether the combustion process is reasonable, evaluate the purification effect of exhaust gas treatment equipment, and avoid facing environmental protection penalties due to excessive pollutant emissions.
Environmental protection on-site law enforcement detection: Environmental protection law enforcement officers can carry portable smoke gas analyzers equipped with this sensor to conduct on-site inspections of scattered pollution sources such as small factories, restaurant kitchens, and small heating boilers. With its low measurement range and high precision advantages, it can quickly obtain nitrogen monoxide emission data, promptly detect violations of emission regulations, and provide precise data support for environmental protection law enforcement.
Instrument maintenance spare parts: As dedicated spare sensors, they are mainly used for the daily maintenance and fault replacement of the smoke gas analyzers to which they are adapted. When the original nitrogen monoxide sensor of the analyzer becomes aged, drifts, or is damaged, it can be replaced in time, quickly restoring the detection accuracy and normal working state of the analyzer, avoiding the impact on the continuity of smoke gas monitoring work due to equipment downtime.

Specifications: