|
Product Details:
|
| Recommended Load Resistance: | ≥10 KΩ | Operating Temperature: | 0 ~ +50 ℃ |
|---|---|---|---|
| Operating Humidity: | 0 ~ 99% RH | Pressure Range: | 0.6 ~ 2 Bar |
| Expected Lifespan: | ≥500,000 % Vol・O2 | Weight: | 28g |
| Linear Error: | <3% Relative | Zero Point Offset: | <40 μV |
| Highlight: | Galvanic Oxygen Sensor 0-100%Vol,Oxygen Sensor for Ventilator,Oxygen Sensor for Anesthesia Machine |
||
Product Description:
YJJ OOA101-1 Galvanic Oxygen Sensor 0-100%Vol for Ventilator & Anesthesia Machine
Features:
Principle: Galvanic cell (Girard cell) oxygen sensor
Interface: 3.5mm single-channel headphone jack (Jack version)
Detection performance
- Measurement range: **0 ~ 100% Vol O₂** (at normal pressure)
- Output in air: 7 ~ 13 mV
- Accuracy: 0~3.3% O₂: ±0.1% absolute value; 3.4~100% O₂: ±3% relative value
- Linear error: <3% relative
- T90 rise time: <5 s; fall time (20.95% → 0.1%): <40 s
- Zero point offset (pure nitrogen): <40 μV
- Cross-interference: CO₂, CO, NO, propane, H₂S, SO₂, benzene, etc. have minimal interference, equivalent to <0.1% O₂
- Long-term drift: <1% Vol O₂ / month, typical total drift over the entire lifespan < -15% relative value
Electrical parameters
- Recommended load resistance: ≥10 kΩ
- Built-in NTC temperature compensation
- No external power supply required, spontaneous mV signal output
- Preheating time: <30 min after replacement
Environment and mechanics
- Operating temperature: 0 ~ +50 ℃
- Operating humidity: 0 ~ 99% RH, no condensation
- Pressure range: 0.6 ~ 2 bar
- Storage temperature: -20 ~ +50 ℃, recommended storage at 5~15℃
- Expected lifespan: ≥500,000 % Vol・O₂ hours
- Weight: approximately 28 g
- Certifications: ISO 13485, PTB certification, RoHS compliance
Product application
Ventilator, anesthesia machine, oxygen therapy equipment, medical monitor, medical oxygen source oxygen concentration monitoring, medical oxygen analyzer
Specifications:
| Measurement range | 0 ~ 100% Vol O2 |
| Output in air | 7 ~ 13 mV |
| Accuracy | 0~3.3% O2: ±0.1% |
| Response time (T90) | < 15s |
| Load resistance | 100 Ω |
![]()
Contact Person: Miss. Xu
Tel: 86+13352990255