oxygen gas sensor online manufacture

Product Description: NAP-50A Catalytic Pellistor Gas Sensor Light Commercial Applications All Flammable Gases Features: Nap-50a is a small size and low power sensor. Nap-50a is mainly used for gas detection. Compared with NAP-55A, NAP-50A has less interference to the alarm caused by alcohol, and the gas detector made by NAP-50A is more reliable. The following are the basic parameters, but it is for civilian use, see the user manual for more information. Refer to the sensor Read More

SMT172 TO-220 Digital Temperature Sensors Maximum Accuracy Ultra Low Power Applications Features and Highlights * World’s most energy efficient temperature sensor 0.36µJ/measurement (TA=25°C, 3.3V) * Wide temperature range: -45°C to 130°C * Wide supply voltage range: 2.7V to 5.5V * High accuracy: ±0.25°C (-10°C to 100°C TO18) ±0.1°C (-20°C to 60°C, TO18) * Extreme low noise: 0.002°C * Ultra-low current (60µA active or 220nA average) * Excellent long term stability * Direct Read More

Product Description: AWM43300VH Air Flow Sensor Dry Gas PCB Through Hole Mounting Method Features: AWM40000 series includes 6SLPM devices without amplifying and amplifying signal processing and using the same circuits and using the same circuits. Air quality sensor features: Multiple centrally mounted O-ring seals Ceramic flow tube (without inlet pipe), 0-1000sccm Plastic flow pipe (no lead pipe High common mode pressure (150psi) The operating temperature can reach 125C Zero Read More

XGZP6847A100KPGN Air Pressure Sensor Gauge Type Amplified Analog Output *Wide Ranges: -100kPa…0kPa…1500kPa(show in Pressure Range Example) *Gauge Pressure Type(Positive&Vacuum) *For Non-corrosive Gas or Air *Optional 5V and 3.3V Voltage *Calibrated Amplified Analog Signal(Refer to XGZP6847D for I2C interface) *Temp. Compensated: 0℃～+60℃(32℉～+140℉) *Affordable Cost, Easy-to-use Specification: Power Supply 5V/3.3V Output Type Amplified Analog Output 0.5~4.5V/0.2~2.7V Accuracy Read More

MG811 CO2 Gas Sensor Module Sensitivity Good sensitivity and selectivity To CO2 Features Good sensitivity and selectivity to CO2 Low humidity and temperature dependency Long stability and reproducibility Application Air Quality Control Ferment Process Control Room Temperature CO2 concentration Detection Specification: Model MG811 Sensor type Solid Electrolyte Target gas CO2 Detection range 350ppm - 10000ppm Heater resistance 35Ω ± 3Ω Heater current 140 ± 20mA Heater voltage 6 Read More

MQ138 Organic Vapor Sensor Conductivity In Clean Air Sensitive material of MQ138 gas sensor is SnO2, which with lower conductivity in clean air. When VOC gas exists, the sensor’s conductivity gets higher along with the gas concentration rising. Users can convert the change of conductivity to correspond output signal of gas concentration through a simple circuit. MQ138 gas sensor has high sensitivity to toluene,alcohol,methanol,also can monitor hydrogen and other organic Read More

ZP16 Air Quality Module Low Power Consumption The air quality module adopts advanced chip thick film semiconductor gas sensor, which has extremely high sensitivity to organic volatile gases such as formaldehyde, benzene, carbon monoxide, ammonia, hydrogen, alcohol, cigarette smoke, and essence. The module has been aged, debugged, calibrated and calibrated, and has good consistency and extremely high sensitivity. Application Air cleaner, fresh-air system, intelligent Read More

XGZP193 Pressure Sensor Board Mountable Gauge Type SMD For Medical FEATURES * Range: 0～10/50/100/200kPa * MEMS technology, Solid-state reliability * Barb inlet pipe. ■ Laser trimmed mV output * Working temp.: -30℃～+85℃(-22℉～+185℉) * Gage pressure type * Easy to use and embed in OEM equipment Specification: Pressure Range 0~10/50/100/200kPa Working Voltage 10-16Vdc Supply Current(10Vdc) 0.5-1mA Working Temperature -30 to +85℃ Storage Temperature -40 to +105℃ Offset/Zero Output Read More