Circuit voltage:5V±0.2V(DC/AC)
Gas type:Combustible Gas
Heater voltage:5V±0.2V(DC/AC)
To specification:< 3 Minutes
Voltage mode:0.4V – 2.0V
To operation:< 60s
Detection gas:Oxygen O2
Maximum load concentration:30vol%
Detection range:0-25%vol
Part Number:0390 0085
Replacement O2 Sensor for:305, 325M, 325S And 325 XL
State:In Stock
Detection principle:Solid Polymer Electrochemical Gas Detection Technology
Operating current:0.65mA @ 5V DC
Power-on stabilization time:< 2min (no Need To Warm Up The Machine, Just Power On And Test)
Output signal:UART, Modbus RTU Protocol. 3.3V TIL Level
Working temperature:-15 To 45 Degrees Celsius
Detection range:0-1500/2000/3000ppm; Can Be Expanded To 5000ppm
Operating voltage:3.3 To 12V DC, 5V DC Recommended
Operating current:0.65mA @ 5V DC
Detection principle:Solid Polymer Electrochemical Gas Detection Technology
perating humidity range:15-95%RH. Non-condensing
Detection principle:Solid Polymer Electrochemical Gas Detection Technology
Power-on stabilization time:< 2min (no Need To Warm Up The Machine, Just Power On And Test)
Error range:± 5% F.S
Repeatability:< ± 2%
Detection principle:Solid Polymer Electrochemical Gas Detection Technology
Operating pressure range Atmospheric pressure:±10%
Operating temperature range:-40 To +55℃
perating humidity range:15-95%RH. Non-condensing
Cost:Reasonable
Sensor Type:Gas Sensor
Life Span:Long
Sensor Type:Gas Sensor
Sensitivity:High
Operating Humidity:Low