Operating humidity:15%~90% Relative Humidity
Sensitivity:0.10±0.02mA (in Air)
Operating pressure:1 Atmosphere ±10%
Working life:>2 years
Dimensions (mm):20.3x10.2mm
Output:30 - 42 A @ 22C, 20.9% 02
O2 Measurement range:0% to 100%
Onboard:temperature compensation
O2 Zero current (offset) lt:0.1%
Working principle:Electrochemical two electrodes
Detection range:0 to 25% O2
Maximum load:30% O2
Measuring range:0-100%
Output signal in air:13-16mv
Circuit interface:3pin (molex)
Output signal:8± 4 nA / ppm
Typical Baseline Range (pure air):±10 ppm NH3 equivalent
T90 Response Time:< 60 seconds
Detection range:0-100% O2
Accuracy KE-50:± 2% (full range)
Operating temperature:5 ~ 40℃
Measurement Range:0-2 ppm O2
Maximum Overload:Maximum Overload
Response Time (T95)*:< 20 seconds
Temperature Compensation:<2% O2 equivalent (0°C to 40°C)
External Load Resistor:10 kΩ minimum
Housing Material:White ABS
Measurement Range:0-10 ppm SO2
Maximum Overload:100 ppm
Filter:To remove H2S and HCl
Output:10 to 16 mV
Zero voltage:less than 0.5mv
Resolution:± 0.1%
Operating Principle:Partial pressure electrochemical
Output:9 mV to 13 mV in 210 mBar O2
Measurement Range:0 mBar to 1500 mBar O2