Type:Galvanic cell (electrochemical) oxygen sensor
Measurement Range:0~100% Vol. O2
Output Signal:9~13 mV
Working principle:Partial pressure electrochemistry
Output voltage:9-13 mV (in air)
Measurement range:0 to 100%
Detected Gas:Oxygen (O₂)
Detection Principle:Electrochemical (galvanic cell type)
Measurement Range:0-30 vol% O₂ (suitable for common air oxygen content monitoring)
Measurement Range:0-10 ppm SO2
Maximum Overload:100 ppm
Filter:To remove H2S and HCl
Model No.:ZP13
Detection Gas:Propane, smoke
Physical Interface:XH2.54-4P terminal socket
Detection principle:NDIR
Detection target:CO2
Detection range:400~10000ppm optional
Maximum load:30% O2
Output signal:100±20 μA in air
Zero drift:(-20 to 40°C) of 0.6%
Measurement range:0 %-100 % oxygen
Nominal sensor lifetime:> 1,000,000 % volume oxygen hours
Initial output signal range in ambient air:9 mV-13 mV
Measuring range:0 to 5000 ppm
Resolution:1 ppm
Weight:0.64 oz. / 18 g
Model:KE-25F3LF
Test gas:21% O2
Atmospheric pressure:1013hPa
Sensor Type:Electrochemical sensor
Measuring Range:0 - 25% O₂
Output Signal:0.41 ± 0.05 mA (in air)
Measurement range:0 - 25% oxygen
Output signal:0.41 ± 0.05 mA
T90 response time:less than 10 seconds