Operating temperature range:-40±50℃
Linear range:0-100ppm
Typical baseline range (pure air):±1 Ppm N H 3 Equivalent
Nominal Range:0-1000ppm
Maximum Overloa:2000ppm
Expected Operating Life:Two years in air
Measurement Range:0 to 5 ppm
Lower Detection Limit**:< 20 ppb (instrumentation dependent)
Response Time:< 15 seconds typical
Operating Humidity:Low
Signal Output:Analog
Operating Temperature:Wide Range
Operating Principle:3-electrode electrochemical
Measurement Range:0-250 ppm NO
Maximum Overload:1000 ppm NO
Repeatability:2% Of Signal
Baseline Offset (clean air):0 To +3 Ppm Equivalent
Sensitivity:0.40 ± 0.08 MA/ppm
Range:0-100% LEL
Sensitivity*:28 ± 5 mV/%methane
T90 Response Time*:<20 seconds (methane)
Detection range:0 to 25% O2
Maximum load:30% O2
Output signal:100±20 μA in air
Technology:Electrochemical
Measurement Range:0.5 to 1000 ppm Co(EN45544 applications)
Maximum Overload:2000PPM CO
Gases Detected:Most combustible gases and vapours
Range:0-100% LEL
Operating Voltage:4.25V d.c.
Linearity:S = K Loge 1/ (1-C)
Output Signal:80 - 130 MA In Air
T90 Response Time:<15 Seconds
Resolution:< 0.7 Ppm
Maximum load:30 Ppm
Sensitivity:140 NA/ppm ± 60 NA/ppm
