Measurement Range:0-2 Ppm O2
Purge Time:< 6 Hours
Output Signal:13 -17 MV In Air With A 10Q Load Resistor
Lower Detection Limit:< 20 Ppb (instrumentation Dependent)
Measurement Range:0 To >20 Ppm
Power Consumption:10 To 50 UW (circuit & Ambient O3 Dependent)
Warranty:3 Years
Alarm Setpoint:Min 5% Vol/ Max 24% Vol
Response Time:T(90) <10 Seconds
range:0 ~ 2000 ppm
Maximum load:4000 ppm
Sensitivity (20°C):0.015 ± 0.005 μA/ppm
Operating temperature range:-40±50℃
Linear range:0-100ppm
Typical baseline range (pure air):±1 Ppm N H 3 Equivalent
Nominal Range:0-1000ppm
Maximum Overloa:2000ppm
Expected Operating Life:Two years in air
Measurement Range:0 to 5 ppm
Lower Detection Limit**:< 20 ppb (instrumentation dependent)
Response Time:< 15 seconds typical
Operating Humidity:Low
Signal Output:Analog
Operating Temperature:Wide Range
Operating Principle:3-electrode electrochemical
Measurement Range:0-250 ppm NO
Maximum Overload:1000 ppm NO
Repeatability:2% Of Signal
Baseline Offset (clean air):0 To +3 Ppm Equivalent
Sensitivity:0.40 ± 0.08 MA/ppm
Range:0-100% LEL
Sensitivity*:28 ± 5 mV/%methane
T90 Response Time*:<20 seconds (methane)
Detection range:0 to 25% O2
Maximum load:30% O2
Output signal:100±20 μA in air
