Range:0 to 20 ppm
Maximum load:100 ppm
Sensitivity:1.4 ± 0.6 uA/ppm
Operating Principle:3-electrode electrochemical
Measurement Range:0-100 ppm
Maximum Overload:500 ppm
Product model:CLE-0613-400
Range:0 to 1000 ppm
Maximum load:2000 ppm
Product model:Product model
Measuring range:10 ppm
Maximum load:20ppm
Operating Principle:3-electrode electrochemical
Linearity:Linear
Recommended Load Resistor:10 Ω
Normal detection range:0 to 500 ppm
Maximum load concentration:1000 ppm
Sensitivity:0.035±0.015uA/ppm
Working principle:Electrochemistry three electrodes
Detection range:0-100 ppm Outline size diagram
Maximum load:500 ppm
Operating Principle:Catalytic Oxidation
Gases Detected:Combustible gases
Range:0-100% LEL
Measuring range:0 to 30% O2
Maximum load:90% O2
Output signal:-350 ± 50 μA in air
Product model:CLE-099-400
Measuring range:0-10 ppm
Maximum load:50 ppm
Range:0 to 50 ppm
Maximum load:100 ppm
Resolution:0.1ppm
Detection Range:0 to 2000 ppm
Filter:To remove acid gases See note on Page 2
Filter Capacity:> 20000 ppm hours
