Sensor Type:Ceramic
Target Gas:H2
Detection Range:0.1～1000ppm(H2)
It is suitable for the detection of carbon monoxide leakage for residential use or industrial use:MEMS CO Gas Sensor
Standard Encapsulation:Ceramic
Detection Gas:CO gas
Measurement Range:0.5 ppm H2S to 200 ppm H2S
Maximum Overload:500 ppm
Onboard Filter:None
Target Gas:Carbon Monoxide
Technology:Electrochemical
Measurement Range:0.5 ppm CO to 1000 ppm CO (EN 45544 applications)
Measurement Range:0.5 ppm CO to 1000 ppm CO (EN 45544 applications)
Maximum Overload:2000 ppm CO
Onboard Filter:To remove acid gases (see note on page 3)
Resistance:Superior Silicone resistance
H2S filter lifetime:typically 1000ppm hr
Output Sensitivity:37±7 mV/%methane
Nominal Range:0 ~ 50 ppm
Maximum Overload:100 ppm
Sensitivity (20℃):0.4 ± 0.1 μA/ppm
Nominal Range:0 ~ 10 ppm
Maximum Overload:20 ppm
Sensitivity (20℃):0.75 ± 0.20 μA/ppm
Nominal Range:0 ~ 10 ppm
Maximum Overload:50 ppm
Sensitivity (20℃):2 ± 1 μA/ppm
Gases Detected:Combustible gases
Range:0-100% LEL
Sensitivity:31 ± 5 mV/%methane
Operating Principle:3-electrode electrochemical
Measurement Range:0-100 ppm H2S
Maximum Overload:1000 ppm H2S
Operating Principle:3-electrode electrochemical
Measurement Range:0-500 ppm CO
Maximum Overload:1500 ppm CO
