Operating Principle:3-electrode electrochemical
Measurement Range:0-500 ppm CO
Maximum Overload:1500 ppm CO
measuring range:0-25% (O2%) or 0-300mbar (ppO2)
high precision:2%FS
response time:T90<10s< span="">
Supply voltage (Vs):Supply voltage (Vs)
Supply current (ls):<7.5mA (streaming one sample per second), <20mA Peak
Output Type:3.3V TTL level RS232
Easy implementation into Sensors Network:0%v.v ±0.01%Vol in 45 seconds
Calibration Curve (EN) or Basic Error (AQ):0 to 5%v.v-> 0.06%v.v or ±6% of Reading whichever is greater.
Short Term Stability (EN):0%v.v = ±0.002%v.v
Operating voltage:3.0V to 6.0V DC
Recommended voltage:5.0V DC
Working current:Average 60mA @5.0V DC
Lower limit of measurement:0.03ppm
Temperature range:-10 to 40℃
Humidity range:15%-90%, non-condensation
Loop voltage:5.0±0.2V DCIAC
Load resistance:MAX 24V
Heater resistance:changeable
Voltage at pin:12V
Storage Temperature:-40-80C
Source/Offset Voltage:15V
Optical Distance:750μm
esponsivity:3.5kV
Temperature CoeWcient:0.1%
Sensor Type:Sensor Type
Standard Encapsulation:Plastic cap
Target Gas:Alcohol gas
detecting whether ethanol steamy exist in other places:Flat surfaced semiconductor
Flat surfaced semiconductor:Metal cap
Target Gas:Alcohol gas
Sensor Type:Flat surfaced
Standard Encapsulation:Metal cap
Target Gas:CH4, Nature gas, marsh gas
